Development of Advanced Photon Calibrator for KAGRA 后印本

摘要: The KAGRA cryogenic gravitational-wave observatory has begun joint observation with the worldwide gravitational waves detector network. Precise calibration of the detector response is essential for the parameter estimation of gravitational wave sources. The photon calibrator is the main calibrator in LIGO, Virgo and KAGRA, and we used this calibrator in joint observation 3 on 2020 April with GEO600 in Germany. KAGRA improved the system for joint observation 3 with three unique points: high laser power, power stabilization system, and remote beam position control. KAGRA employs the 20 W laser and divides it into two beams injected on the mirror surface. By using a high-power laser, we can calibrate the response at the kHz region. To control the power of each laser independently, we also installed an optical follower servo for each beam power stabilization. By controlling the optical path of the photon calibrater beam positions with pico-motors, we were able to characterize the rotation response of the detector. We also installed a telephoto camera and QPD to monitor beam position and controlled beam position to optimize mirror response. In this paper, we discussed the statistical error with the result of the relative power noise measurement. We also discussed systematic errors about the power calibration model of photon calibrator and simulation of elastic deformation effect with the finite element analysis.