Optimization of a dual-end readout bar-shaped scintillator detectors for Compton imaging

Abstract: Compton imaging enables high-sensitivity imaging of gamma radiation sources without collimation, making it useful for homeland security, nuclear decommissioning, and space science. This study proposes a position-sensitive bar-shaped detector used for Compton imaging. The bar-shaped scintillator detectors are arranged in a planar array, with signals read out from the dual end of the detector to reduce electronics channels. The detection system developed in this study with advantages of radiation hardness, high efficiency and low cost. A large sensitive volume of a 5mm × 5mm × 100mm CsI(Tl) scintillator detector, with a light output of 56 000 photons/MeV, was used to verify position and energy resolution. Considering the surface roughness and reflectors, the experiment results indicate that the bar-shaped scintillators can achieve an average position resolution better than 5mm and 7.2%(FWHM) energy resolution at 662 keV. Therefore, a balance between position resolution and energy resolution can be achieved by the bar-shaped scintillators with few readout electronics. The imaging detection system of 80 cm3 sensitive volume, constructed with bar-shaped scintillators, can be used for Compton imaging in an energy range of 250 keV to 3MeV.